0-Flute CNC Router Endmill Bit Set For Acrylic – 1/8″ & 1/4″

$36.50

0-flute bits are the go-to bits for all things acrylic with CNC routers. If you haven’t created LED-lit acrylic projects, it’s definitely time.

This is a set of bits (specs below). You are getting 1/8″ and 1/4″ diameter bits to make sure you are ready for both small AND big jobs!

In stock

Description

0-flute bits are the go-to endmill bits for all things acrylic with CNC routers. If you haven’t created LED-lit acrylic projects, it’s definitely time.

Or if you want to make projects from aluminum, this bit will work on that too!

This is a set of bits (specs below). You are getting 1/8″ and 1/4″ diameter bits to make sure you are ready for both small AND big jobs!

Both acrylic and aluminum require a high-spiral bit that minimizes contact with the plastic to prevent melting, which ‘galls’ the material to the bit, making it ineffective. This also virtually eliminates the other enemy of cutting plastic…melting it and causing it to bind to the cut surface.

This set contains one bit of each size.

All bits on this site are made of carbide steel. Carbide is what professional metal machinists use to make complex items like car engines. It stays sharp 50x longer than conventional CNC router bits.

For depth of cuts, see table at the bottom

Specs for 1/8″

  • Cut diameter: 1/8″ (3.175mm)
  • Shank dia: 1/8″ (3.175mm)
  • Overall Length: 1.5″ (38mm)
  • Flutes: 1
  • Flute length: 0.5″ (12mm)
  • Material: 100% carbide

Specs for 1/4″

  • Cut diameter: 1/4″ (3.35mm)
  • Shank dia: 1/4″ (6.35mm)
  • Overall Length: 2″ (50mm)
  • Flutes: 1
  • Flute length: 1.0″ (25mm)
  • Material: 100% carbide

Settings (use for both bits)

  • Feed: 60-80 inches per minute (25-30mm per second) for acrylic
  • Feed: 30 inches per minute (12mm per second) for aluminum
  • Plunge (for drilling only): Same as feed**
    • **NOTE: It is always best to ramp into the project
  • Speed (rpm): 13000
  • For CNC’s with routers, use half speed

Depth of cut for 1/4″

  • On acrylic: Up to 0.5″ (12mm}
  • On aluminum: 0.25″ (6mm)

Depth of cut for 1/8″

  • On acrylic: Up to 0..25″ (6mm}
  • On aluminum: 0.125″ (3.5mm)

Additional information

Weight 4 oz
Dimensions 9 × 7 × .5 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…