Description

The micro-detail 1/32″ down-cutting endmill bit is the CNC’ers magic to refined CNC router projects.

(a.k.a. down bit, down cut bit, downcut bit)

There are 2 reasons you want this bit…

1. You have decided your projects are going to better than everyone else’s
2. You just want to push your limits of creativity.

A third reason is if you have a small unit with a 1/8″ collet capability. If so, this is a must to make your creations.

This bit is made like the all the others on this site…built to last. That’s why these are made above industry standards and 100% tungsten carbide.

Carbide is what professional metal machinists use to make complex items like car engines. It stays sharp 50x longer than conventional CNC router bits.

You’ll want to include a collet with this bit if you have a 1/4″ collet in your CNC router. You can order that by clicking here.

Order your ultra-finishing workhorse 1/32″ down-cut bit today.

Made in the USA

Specs

• American-made, American sharp!
• Cut Diameter: 1/32″
• Shank: 1/8″
• Length: 1.51″
• Flutes: 2
• Flute length: 0.1875″
• Material: 100% carbide

Settings

• Feed: 15-250 inches per minute
• Plunge: 5 ipm
• Depth per pass: 0.016″
• Speed (rpm): 13000-16000

FREE Feeds & Speeds table PDF. Download by clicking here

Is it time to replace your 1/4″ down-cut endmill? https://idcwoodcraft.com/product/1-4-down-cutting-bit-for-cnc-routers/