1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
pizza peel
1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects
pizza peel

1/4" Radius Round Over Router Bit, 1/4" Shank (Corner/Edge Rounding)

The 1/4" rounding radius CNC router bit is the bit that adds elegance to your woodworking CNC project that gives it the extra character to make it stand out. Round the borders or letters. It doesn't matter, as long as you have 1/4" to play with on your project, this cutter will spice your project up.

  • Shank: 1/4" (6.35mm), Flutes: 2, Length: 2" (55mm)
  • Radius: 1/4" from center of bit, Material: Tungsten carbide brazed insert on 4140 body

$32.73 USD

Availability: In Stock

Quantity:

Enhance Your Carve

1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects

1/4" Radius Round Over Router Bit, 1/4" Shank (Corner/Edge Rounding)

$32.73 USD

Add this item

+

1/4" radius round over bit with 1/4" shank for cnc router pizza peel projects

1/4" Radius Round Over Router Bit, 1/4" Shank (Corner/Edge Rounding)

$32.73 USD

Add this item

+

1/8" compression endmill for minimal tear out by idc woodcraft

1/8" Compression Bit For CNC Routers, 1/8" Shank

$29.72 USD

Add this item

Key Details

Feeds And Speeds

Reviews

The 1/4 round router with a 1/4 shank is a wood-cutting bit for CNC routers and conventional routers. This is the bit that adds elegance to your woodworking CNC project that gives it the extra character to make it stand out. The radius bit will round the borders or letters. It doesn't matter, as long as you have 1/4" to play with on your project, this 1/4 round cutter will spice your project up.

The IDC Woodcraft brand 1/4 Round Over Router Bit (a.k.a. rounding bit, radius bit) simplifies the toolpath setup. It is designed to come to a point, instead of having a flat at the bottom. This completely eliminates form-tool setup in your CNC design software. NO OFFSETTING OF THE 1/4 ROUNDING BIT IS REQUIRED!! Just set it up to run on a profile line at 0.245" deep and you end up with a perfect radius that requires minimal smoothing.

Uses: Rounding cutting board edges, box making (edges and lids), and more

Item SKU: RO-14

Specs

  • Shank: 1/4" (6.35mm)
  • Flutes: 2
  • Length: 2" (55mm)
  • Radius: 1/4" from center of bit
  • Material: Tungsten carbide brazed insert on 4140 body

Settings for your CNC router

  • Feed rate: 60 inches per minute
  • Plunge rate: 20 inches per minute
  • Stepover: 6-8%
  • Depth per pass: 0.250"
  • Speed (rpm) 17,000

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

QR Code Image for 1/4" Radius Round Over Router Bit, 1/4" Shank (Corner/Edge Rounding)

Customer Reviews

Based on 15 reviews
93%
(14)
7%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Dennis Rhodes
Haven’t used it yet

Not used yet

C
C.

It works nicely. Nice smooth surface with no tear out. It cut exactly as the s/w simulation predicted.

A
Austin Avery
Small text

Change your depth of cut to 1/2 to 2/3 listed to cut small text with a better look than just a 1/32 to 1/16
End mill,
A pattern for v carving with two lines the same width apart, 3/32 to 5/32 best for 1/8space, use a profile tool path on both lines for a raised bead instead of a recessed V. Celtic shamrock pattern looked better than the v carve

C
Charles Earle
Looks great, just have not had the chance to use them.

Will review again when i use them.

R
Raymond

Items was perfect like all of the products from IDC. Great products and Great Business.