1/4" up cut endmill for cnc routers
1/4" up cut endmill for cnc routers
1/4" up cut endmill for cnc routers
1/4" up cut endmill for cnc routers
1/4" up cut endmill for cnc routers
1/4" up cut endmill for cnc routers

High-Performance 1/4 Up Cut Endmill For CNC Routers, 1/4 Shank

The 1/4" up bit, the hog-it-out machine of CNC router bits! This is your first go-to bit with your CNC router when you want to just get material out of the way. Save wear on your down bits for the detail work.

  • Cutting diameter: 1/4" (0.25 inches)
  • Shank: 1/4" / Length: 2.51" / Flutes: 2 / Flute length: 1.0"
  • 100% carbide, lasts 50x longer than traditional CNC router bits
  • Made in the USA

$33.98 USD

Availability: In Stock

Quantity:

Key Details

Feeds And Speeds

Reviews

The high-performance 1/4" up-cutting endmill bit (a.k.a. up bit, up cut bit, upcut bit) is the bit that hogs out the bulk of material while leaving a clean surface finish. This is the bit where you can crank up the feeds to significantly reduce cutting time.

This is the reasonable go-to for your work when you have lots of material to remove and don't want unnecessary wear on your down cutters. It is standard practice to this carbide cutter in the rack.

For these reasons, you want to make sure your 1/4" up cut CNC router bit is made right & built to last. That's why these are made above industry standards and 100% tungsten carbide.

Carbide is what professional metal machinists use to make complex items like car engines. It stays sharp 50x longer than conventional CNC router bits.

Order your workhorse 1/4" up-cut bit today.

Made in the USA

Item SKU: UC-14

Specs

  • Cut diameter: 1/4"
  • Shank: 1/4"
  • Length: 2.5"
  • Flutes: 2
  • Flute length: 1"
  • Material: 100% carbide

Settings

  • Feed rate: 80 inches per minute
  • Plunge rate: 40 inches per minute
  • Speed(rpm): 19,000
  • Depth per pass: 0.250"
  • Stepover: 40%

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

QR Code Image for High-Performance 1/4 Up Cut Endmill For CNC Routers, 1/4 Shank

Customer Reviews

Based on 14 reviews
100%
(14)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Micheal

These are nice, really, like the cut they leave.

S
Steve m
Up cut end mill

Love Garrett and he shipped it out pretty fast. Not the cheapest bits but far superior to the Amazon alternatives….

S
Steve Mackinlay
Steve from Wizards Workshop

Hi Garret, the router bits are awesome, I've been so busy creating I haven't had time to reply till now, I had to laugh, when I first started learning I decided to do some peck drilling and burnt holes instead of cutting them, then the very next video that came up was you telling us to never ever peck drill with a down cut bit, I drilled half a dozen holes before I decided I'd better stop, but that quater inch down cut bit stood up to the punishment well and it still cuts guts good.

D
Duane Kirby
Beginner

Haven’t used yet

G
George Navarre
1/4 in upcut

I think it's a great bit, as well as others from IDC. I have been buying my bits there and I don't look anywhere else.