Description

The Big Stiffy series 150-degree v-bit for CNC routers is the bit to use on those large area carves when you want your job done fast and clean. With a 1/4″ shank, it is the go-to v carving bit for home-based CNC’ers when it comes to larger projects. The ‘super-shear’ blade design is designed to leave exceptionally clean cuts at higher feeds rates. This is the v bit to use when your v-carved letters are wider than 1″.

Why is it called the Big Stiffy? Overall, the bit length is a bit shorter than most. This little design modification keeps your bit stiffer during cuts, which gives you a 50% improvement in your surface finish. In other words, the potential for chatter is virtually eliminated.

This bit has a carbide blade brazed to a 4140 body.

Specs

• Shank: 1/4″ (6.35mm)
• Cut diameter: 2″ (50mm)
• Cut angle: 150 degrees
• Length: 2.0″ (52mm)
• Flutes: 2
• Flute length: 0.135″
• Material: 100% tungsten-carbide tipped

Settings

• Feed: 80 inches per minute (16mm/sec)
• Plunge: 20 inches per minute
• Speed (rpm): 10000-14000
• Max pass depth: 0.130″ / 6mm
• Stepover: 20%
• For CNC routers, see this speeds & feeds table

FREE Feeds & Speeds table PDF. Download by clicking here