CNC Bits For Guitar Making Extended Length CNC Router Bit Set

$97.82

If you’re into making guitars on your CNC router, you have found the only combo bundle CNC router bits set made for the CNC luthier. This extra long set allows you to get deep onto your carve before you have to flip the project.

  • Extra long flutes
  • Hogging bit to clear the rough cutting
  • Extra long 1/8″ bit to get the tighter details

Out of stock

Description

If you’re into making guitars on your CNC router, you have found the only combo bundle CNC router bits set made for the CNC luthier. This extra long set allows you to get deep onto your carve before you have to flip the project.

Of course, you can use this CNC router bit set for any project that requires deep carving.

To see some examples of the types of guitar you can make, click here.

What you get…

1/4″ Roughing Endmill Bit – Guitar Makers Clearing Workhorse

This bit is not designed to make your project look pretty. It’s designed to get your guitar body and neck material removed fast!!

  • With an 80% stepover, and a cut depth of up to 1-1/2″*, this 1/4″ bit can remove massive amounts of material.
  • Standard bits require a lot of passes to get to the bottom of guitar bodies and the various cutouts. That takes a lot of time. Not with the roughing endmill. Even though the feed rate of 40ipm & and spindle speed of 9,000-12,000, that cut depth ability cuts your prep cutting in half or more so you can get on with the fine curves of your guitar.

1/4″ Extra Long Finishing Endmill Bit – Guitar Finishing Bit

Let this extra long 1/4″ down-cutting endmill comes in behind your roughing bit to finish the guitar making. If you set the job up right with the roughing bit, you can get the entire finish cut done in one pass on each aspect of your project up to 1-3/4″ deep.

1/8″ Extra Long Finishing Endmill Bit – Fine Guitar Details

You will have to fit some smaller components into the guitar you’re making. This is the bit to knock out those tighter corners and wrap up the details. A full 1″ cut depth is at your disposal*.

If you want to add a round-over to your guitar on your CNC router, you might consider getting the 1/4″ radius rounding bit.

These CNC bits for guitar making are all solid carbide.

Bundle savings: 18%

Other uses for your deep-cutting set

  • Pocketing out deep box projects
  • Full 3D carvings
  • French/Victorian table legs

Specs – 1/4″ roughing endmill (#RE-14)

  • Cut diameter: 1/4″
  • Shank: 1/4″
  • Length: 2.75″
  • Flutes: 3
  • Flute length: 1.5″
  • Material: 100% carbide

Settings

  • Feed: 40 inches per minute
  • Speed (rpm): 9,000-12,000**
  • Step-over: 70-90%

Specs – 1/4″ extra long finishing endmill

  • Cut diameter: 1/4″
  • Shank: 1/4″
  • Length: 3.375″
  • Flutes: 2
  • Flute length: 1.75″ (2.0″ capability)
  • Material: 100% carbide

Settings

  • Feed: 40-50 inches per minute
  • Speed (rpm): 14000
  • Step-over: 40% max

SpecsĀ  1/8″ extra long finishing endmill

  • Cut diameter: 1/8″
  • Shank: 1/8″
  • Length: 2.15″
  • Flutes: 2
  • Flute length: 1.0″
  • Material: 100% carbide

Settings

  • Feed: 30-40 inches per minute
  • Speed (rpm): 14000
  • Depth of cut per pass: 0.125″
  • Step-over: 40%max (recommended 30%)

To download the Vectric database with all IDC Woodcraft router bits, click here

*

**Roughing endmills are not intended to run at high spindle speeds or feed rates. they are intended to hog out at depth.

Additional information

Weight 1 oz
Dimensions 9 × 7 × .5 in

Reviews

There are no reviews yet.

Be the first to review “CNC Bits For Guitar Making Extended Length CNC Router Bit Set”

Your email address will not be published.


You may also like…