extra long 1/4" end mill set for guitar making with a cnc router
1/4" roughing bit for cnc routers with a 1/4" shank by idc woodcraft
1/4" roughing bit for cnc routers with a 1/4" shank by idc woodcraft
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/4" end mill set for guitar making with a cnc router
extra long 1/4" end mill set for guitar making with a cnc router
extra long 1/4" end mill set for guitar making with a cnc router
extra long 1/4" end mill set for guitar making with a cnc router
1/4" roughing bit for cnc routers with a 1/4" shank by idc woodcraft
1/4" roughing bit for cnc routers with a 1/4" shank by idc woodcraft
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/8" end mill for guitar making with a cnc router
extra long 1/4" end mill set for guitar making with a cnc router
extra long 1/4" end mill set for guitar making with a cnc router
extra long 1/4" end mill set for guitar making with a cnc router

CNC Bits For Guitar Making Extended Length CNC Router Bit Set

If you're into making guitars on your CNC router, you have found the only combo bundle CNC router bits set made for the CNC luthier. This extra long set allows you to get deep onto your carve before you have to flip the project.

  • Extra long flutes
  • Hogging bit to clear the rough cutting
  • Extra long 1/8" bit to get the tighter details

$99.32 USD

$112.75 USD

Availability:
Out Of Stock

Key Details

Feeds And Speeds

Reviews

If you're into making guitars on your CNC router, you have found the only combo bundle CNC router bits set made for the CNC luthier. This extra long set allows you to get deep onto your carve before you have to flip the project.

Of course, you can use this CNC router bit set for any project that requires deep carving.

To see some examples of the types of guitar you can make, click here.

What you get...

1/4" Roughing Endmill Bit - Guitar Makers Clearing Workhorse

This bit is not designed to make your project look pretty. It's designed to get your guitar body and neck material removed fast!!

  • With an 80% stepover, and a cut depth of up to 1-1/2"*, this 1/4" bit can remove massive amounts of material.
  • Standard bits require a lot of passes to get to the bottom of guitar bodies and the various cutouts. That takes a lot of time. Not with the roughing endmill. Even though the feed rate of 40ipm & and spindle speed of 9,000-12,000, that cut depth ability cuts your prep cutting in half or more so you can get on with the fine curves of your guitar.

1/4" Extra Long Finishing Endmill Bit - Guitar Finishing Bit

Let this extra long 1/4" down-cutting endmill comes in behind your roughing bit to finish the guitar making. If you set the job up right with the roughing bit, you can get the entire finish cut done in one pass on each aspect of your project up to 1-3/4" deep.

1/8" Extra Long Finishing Endmill Bit - Fine Guitar Details

You will have to fit some smaller components into the guitar you're making. This is the bit to knock out those tighter corners and wrap up the details. A full 1" cut depth is at your disposal*.

If you want to add a round-over to your guitar on your CNC router, you might consider getting the 1/4" radius rounding bit.

These CNC bits for guitar making are all solid carbide.

Bundle savings: 18%

Other uses for your deep-cutting set

  • Pocketing out deep box projects
  • Full 3D carvings
  • French/Victorian table legs

Item SKU: XD-3P-SET

HOG

Settings

  • Feed rate: 80 inches per minute
  • Plunge rate: 80 inches per minute
  • Speed(rpm): 22,000
  • Depth per pass: up to 0.750"
  • Stepover: 80%

Specs

  • Cut diameter: 1/4"
  • Shank: 1/4"
  • Length: 2.75"
  • Flutes: 3
  • Flute length: 2"
  • Material: 100% carbide

1/4" Extra Long Finishing Endmill 

Settings

  • Feed rate: 40 inches per minute
  • Plunge rate 15 inches per minute
  • Speed(rpm): 14,000
  • Depth per pass: 0.250"
  • Stepover: 40%

Specs

  • Overall length: 3.375"
  • Flute length: 2"
  • Number of flutes: 2
  • Shank diameter: 0.250"
  • Cut diameter: 0.250"

1/8" Extra Long Finishing Endmil

Settings

  • Feed rate: 30 inches per minute
  • Plunge rate: 15 inches per minute
  • Speed(rpm): 14,000
  • Depth per pass: 0.050"
  • Stepover: 40%

Specs

  • Overall length: 2"
  • Flute length: 1"
  • Number of flutes: 2
  • Shank diameter: 0.125"
  • Cut diameter: 0.125"

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Customer Reviews

Based on 8 reviews
100%
(8)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Sean Diaz
Hell Yea

I'm still waiting to put my onefinity woodworker together.... but I must say! I really loved the packing job, info cards and now the app! I'm so looking forward to making sawdust.

Been watching your instruction videos online....and really appreciate your desire to help us newbies!

As a small one man shop I always want to use American suppliers that really care about their products and are willing to help customers when they get in a jam...I wish IDC all the best! And you have a customer for life in me sir!

God Bless
Sean Diaz

G
Gary Graham
I have received several bits

However, still on vacation , will evaluate and report when my vacation is over soon. Pls bare with me.

a
alfred murken
They look good

The bits look good but haven’t had a chance to use them yet. Looking forward to trying them on my first project in the next week or so.

R
RICHARD POGUE
Extended length bits

Great quality will get down deeper than the standard length bits with no noticeable flex.

D
Donovan Clarke
The Hog

The Hog was I was very impressed by it. I did a test cut at 60 in per minute at a full 1-in depth cut