Fine Detail 3D Carving Bit For CNC Routers, 1/4″ Shank

$26.74

The taper ball nose endmill is the most common router bit for CNC routers when designing finely detailed 3D carvings on your CNC router. The broader 10° angle significantly reduces tip deflection common on shallower angled bits. Also known as a ‘carving bit‘, the 0.03″ diameter tip carves your detail while keeping the run time down.

Specs:

  • Shank: 1/4″ (6.35mm), Flutes: 2, Length: 2.375″ (55mm), Angle: 10 degrees
  • Ball nose radius: 0.030″ (1.0 mm), Feed rate setting: 80-120 in/m (35-47mm/s), RPM: 14,000-18,000

In stock

Description

When it comes to bits for 3D carving, the fine detail 3D carving bit, also known as a taper ball nose endmill, is the most common router bit for fine detail 3D projects on a CNC router.

The broader 10° angle significantly reduces tip deflection common on shallower angled bits, such as 6°, 5°, or less. Tip deflection can deform the fine details of your 3D carve, making the look ‘not quite right’.

Also known as a ‘carving bit‘, the fine detail 3D carving bits 0.07″ diameter tip is able to hold the fine detail in your 3D carves extremely well, while keeping the run time down.

Every CNC’er wants to make awesome 3d carves. The fine detail 3D carving bit is the bit to start with. To learn how to set up 3d carves, watch this video.

Specs: for this CNC router bit.

  • Shank: 1/4″ (6.35mm)
  • Flutes: 2
  • Length: 2375″ (55mm)
  • Angle: 10 degrees
  • Ball nose radius 0.030″ (1mm)
  • Material: Tungsten carbide

Settings for your CNC router

  • Plunge rate: 20 ipm
  • Feed rate: 60-80 in/m (35-47mm/s)
  • Stepover: 6-8%
  • RPM: 14,000-18,000

For CNC’s with routers, refer to this PDF download feeds & speeds table

Additional information

Weight .8 oz
Dimensions 9 × 7 × .5 in

Reviews

There are no reviews yet.

Be the first to review “Fine Detail 3D Carving Bit For CNC Routers, 1/4″ Shank”

Your email address will not be published.


You may also like…