Sale!

Long 1/4″ Roughing Endmill Bit For CNC Routers, 1/4″ Shank

$35.26

The 1/4″ roughing endmill bit (hogging bit) is the bit when you need to remove massive amounts of material at one time from your CNC router project before you do your finish cuts.

  • Carving guitar bodies
  • Pocketing out deep box projects
  • Full 3D carvings
  • French/Victorian table legs

Out of stock

Description

If you’re looking for speed to rough out your CNC router projects, the long 1/4 roughing endmill CNC router bit is the one you want!!. We call it the ‘HOG’ here at IDC Woodcraft because it literally is a hog when it comes to removing material mind-blowingly fast from your CNC woodworking project.

With a whopping 3/4″ depth of cut per pass,¬† 80ipm plunge rate (yes, I said plunge rate), 80ipm feed rate, and 80% step-over, this bit kicks serious ass when it comes to getting material removed, so you can follow up with your finishing bit to finish your job off.

But it’s not just a time thing. Making the roughing endmill CNC router bit your workhorse for major material removal on your CNC woodworking projects, you save a ton of wear and tear from your regular up-cut, down-cut, or compression router bits. You’ll only use them to do the finishing work.

That alone extends the life of your bits significantly, saving you money for replacements. At $35-ish bucks a pop, the long 1/4 roughing endmill will 100% save you some cash. Especially when it comes to hardwood.

What is the long 1/4 roughing endmill bit good for?

  • Guitar making
  • Keepsake box making
  • Cutting boards
  • Bulky 3D carvings
  • Table legs, like Victorian table legs or French table legs
  • Other thick woodworking projects¬†when you need to remove a lot of wood from hardwood

Plainly put, the up-cutting long 1/4 roughing endmill bit is the CNC bit to use when you need to remove massive amounts of material!

It’s not designed to make a pretty cut. It is designed for speed!

Do one better. Get the Long Router Bit Combo Set. It comes complete with a long 1/4 router bit (down-cut) AND a long 1/8 CNC router bit (down-cut)? Click here to check it out!

Specs

  • Cut diameter: 1/4″
  • Shank: 1/4″
  • Length: 2.75″
  • Flutes: 3
  • Flute length: 1.5″
  • Material: 100% carbide

Settings

  • Feed: 80 inches per minute
  • Plunge: 80ipm
  • Speed (rpm): 12,000-14,000
  • Step-over: 80%

To download the Vectric database with all IDC Woodcraft router bits, click here

Additional information

Weight 1 oz
Dimensions 9 × 7 × .5 in

Reviews

There are no reviews yet.

Be the first to review “Long 1/4″ Roughing Endmill Bit For CNC Routers, 1/4″ Shank”

Your email address will not be published.


You may also like…