Beast and HOG CNC Roughing router bit set by idc woodcraft
Beast Hog CNC router bit combo by idc woodcraft
The HOG being used in sold oak on CNC Router
Beast and HOG CNC Roughing router bit set by idc woodcraft
Beast Hog CNC router bit combo by idc woodcraft
The HOG being used in sold oak on CNC Router

BEAST-HOG Combo 1/4 Roughing CNC Router Bits, 1/4 Shank

The 1/4" roughing endmill bit (hogging bit) is the bit when you need to remove massive amounts of material at one time from your CNC router project before you do your finish cuts.

  • Carving guitar bodies
  • Pocketing out deep box projects
  • Full 3D carvings
  • French/Victorian table legs

$84.36 USD

Availability: In Stock

Quantity:

Enhance Your Carve

Beast and HOG CNC Roughing router bit set by idc woodcraft

BEAST-HOG Combo 1/4 Roughing CNC Router Bits, 1/4 Shank

$84.36 USD

Add this item

+

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

$28.56 USD

Add this item

+

1" ball nose with 1/4" shank for big pockets on cnc router by idc woodcraft

'Big Balls' 1" Ball Nose Rounding Bit, 1/2" Radius, 1/4 Shank Router Bits

$39.87 USD

Add this item

CHECK OUT THE BEAST IN ACTION

Watch the beast rip through hardwood at unimaginable feed rates of up to 1000 inches per minute!

Large projects, pockets and any hardwood you can think of are no match for the BEAST!

Key Details

Feeds And Speeds

Reviews

Here’s a powerful combination of CNC router bits for you. This set of the "Hog" and the "Beast" roughing bits for CNC routers, is designed to conquer material removal in record time on your CNC woodworking projects. Say goodbye to long carve times and hello to lightning-fast results with this dynamic duo.

The sole purpose of this set is speed, making them the undisputed champs when it comes to efficiently removing material from your CNC router woodworking projects.

 Let's start with the aptly nicknamed "Beast," a hyper-speed CNC router bit with a 1/4" shank from IDC Woodcraft. This roughing bit is the ultimate solution for rapid material removal. While it falls into the roughing bit category, don't underestimate its capabilities. The "Beast" will blow your mind with its unparalleled speed and efficiency.

 Featuring an impressive 3/4" depth of cut per pass, a 100ipm feed rate, and an 80% step-over, the "Beast" is designed to excel in delivering lightning-fast material removal. In fact, it can handle feed rates as high as 800 inches per minute on very hard wood with floor-model machines.

 Built with a thicker core and a shorter flute length, the "Beast" CNC router bit is engineered to withstand rigorous workloads. Its durability ensures it can handle the heavy lifting, allowing your other CNC router bits to focus on delivering clean cuts and intricate details. 

And now, with the addition of the "Hog" roughing bit, you have the ultimate combination set at your disposal. The "Hog" features a 1 1/2" flute length, making it ideal for tackling deeper carves the “Beast” can’t reach, such as deep bowls and guitar bodies.

Together, the "Beast" and the "Hog" form an unstoppable team that will transform your CNC woodworking project run time.

Don't let material removal slow you down. Unleash the power of the "Beast" and the "Hog" on your CNC woodworking projects and experience the significant time savings firsthand. With this bundle, you'll always have a backup, ensuring uninterrupted progress in your work. Upgrade your CNC routing game today with the "Hog" and the "Beast" roughing bits.

Why would you want these bits? Not just for speed when roughing out your material, but also to save wear and tear on your clean-cutting bits, like your up-ct, down-cut and compression endmills. Let the “Beast” and “Hog” do the material removal, and the others do the delicate clean-up to make your CNC project look its best!

 

Item SKU: BEAST-HOG Set

BEAST

Settings

  • Feed rate: 100 inches per minute
  • Plunge rate: 80 inches per minute
  • Speed(rpm): 22,000
  • Depth per pass: up to 0.750"
  • Stepover: 80%

Specs

  • Cut diameter: 1/4"
  • Shank: 1/4"
  • Length: 2.5"
  • Flutes: 3
  • Flute length: 1"
  • Material: 100% carbide

HOG

Settings

  • Feed rate: 80 inches per minute
  • Plunge rate: 80 inches per minute
  • Speed(rpm): 19,000
  • Depth per pass: up to 0.750"
  • Stepover: 80%

Specs

Specs

  • Cut diameter: 1/4"
  • Shank: 1/4"
  • Length: 2.75"
  • Flutes: 3
  • Flute length: 2"
  • Material: 100% carbide

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Customer Reviews

Based on 22 reviews
100%
(22)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
a
albert reber

haven't used it yet but I am sure it will do well thks AL

P
PAUL CHERISH
Never received t he order

Never received the order

R
Randall Totty
Long Overdue: But mislabeled.

These 2 need to be in very cnc cabinet PERIOD. The Beast for all of you out there should be renamed the “Atomic Beast”. Don’t bother with a cup of coffee, you will not have time to drink it with this guy.

j
johan kalssen
JTK

Hi I’ve seen it so many times online how it works so I had to buy it just to prove myself and I do not wanna go back with any other bits I wish there was an option to get a eighth with the same cutting it cuts like smooth as butter sewer recommended would be a good Christmas gift whoever has a CNC machine thank you

E
Eileen Plebani
Beast hog combo

Gave as a gift