Shop

Shop By Project

Shop By Type

Sets

Sets

Inlay

Inlay

3D Carving

3D Carving

Acrylic

Acrylic

Engraving

Engraving

Bowl And Tray

Bowl And Tray

Digital Files

Digital Files

Sets

Sets

Accessories

Accessories

Ball Nose

Ball Nose

Collets

Collets

Compression

Compression

Downcut

Downcut

Drills

Drills

Engraving

Engraving

Extended Cut

Extended Cut

Roughing

Roughing

Rounding

Rounding

Slotting

Slotting

Straight Cut

Straight Cut

Surfacing

Surfacing

Upcut

Upcut

V Grooving

V Grooving

Digital Files

Digital Files

CNC Resources

Database Downloads

About

Contact Us

Get A Gift Card

Shop

Shop By Project

Shop By Type

Sets

Sets

Inlay

Inlay

3D Carving

3D Carving

Acrylic

Acrylic

Engraving

Engraving

Bowl And Tray

Bowl And Tray

Digital Files

Digital Files

Sets

Sets

Accessories

Accessories

Ball Nose

Ball Nose

Collets

Collets

Compression

Compression

Downcut

Downcut

Drills

Drills

Engraving

Engraving

Extended Cut

Extended Cut

Roughing

Roughing

Rounding

Rounding

Slotting

Slotting

Straight Cut

Straight Cut

Surfacing

Surfacing

Upcut

Upcut

V Grooving

V Grooving

Digital Files

Digital Files

CNC Resources

Database Downloads

About

Contact Us

Get A Gift Card

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank
The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

Availability: In Stock

$28.56 USD

Quantity:

The 1/8" BADGER roughing endmill, coined "The little bit with a BIG BITE", is the bit when you need to remove massive amounts of material in small areas quickly to reduce your run times. Then follow up with a finishing bit. Designed for those who have a lot of detail in their CNC projects.

Enhance Your Carve

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

The "BADGER" 1/8 High-Speed Roughing CNC Router Bit, 1/8 Shank

$28.56 USD

Add this item

+

1/8 Down Cut Endmill Bit For CNC Routers, 1/8 Shank

1/8 Down Cut Endmill Bit For CNC Routers, 1/8 Shank

$19.98 USD

Add this item

+

Ultra-Clean Cutting 60 Degree V-bit for CNC Routers, 1/4 Shank

Ultra-Clean Cutting 60 Degree V-bit for CNC Routers, 1/4 Shank

$33.96 USD

Add this item

Key Details

Feeds And Speeds

Reviews

If you’ve experienced long carve times with your 1/8” bits, or even had them break because they cannot handle the workload, then get ready for this wicked little bit called the “BADGER

The BADGER has been called “The little bit with a BIG BITE”  by our fellow creators who tested it. For a 1/8” CNC router bit, no other 1/8” bit can match its aggressiveness and blazing speed for removing material from your CNC router project.

With a 1/8 shank and 1/8” cut diameter, the BADGER falls into the roughing bit category. The BADGER is not designed to deliver clean cuts. Its sole purpose is speed, and it excels at it!

Featuring a staggering 1/4" depth of cut per pass, 80ipm plunge rate, 70% step-over, and a whopping 130 inches per minute cut rate, the BADGER is undisputed when it comes to rapid material removal from your CNC router woodworking projects.

Comparing to other 1/8” endmills, the BADGER can remove material 10X faster than standard 1/8” endmills

Comparison Between the BADGER and Standard 1/8" Bits

Settings

Badger

Std. 1/8" Endmills

Feed Rate  (Ipm)

130

50

Depth Per Pass

0.25

0.0625

Stepover

70%

40%

Plunge Rate (ipm)

80

20

 

Getting a roughing bit like the BADGER is not just about time savings. It is also about saving your other 1/8” bits for the finishing touch-up AND prolonging the life of them.

By using the BADGER as your workhorse for major material removal, you'll extend the lifespan of your regular CNC router bits. Let them handle the finishing touches while the BADGER handles the heavy lifting when a lot of material needs to be removed in fine details…like Aztec calendars.

Item SKU: BADGER

Specs

  • Cut diameter: 1/8"
  • Shank: 1/8"
  • Length: 1.75"
  • Flutes: 3
  • Flute length: 5/8"
  • Material: 100% carbide

Settings

  • Feed rate: 130 inches per minute
  • Plunge rate: 80 inches per minute
  • Speed(rpm): 19,000
  • Depth per pass: 0.25"
  • Stepover: 70%

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Customer Reviews

Based on 47 reviews
100%
(47)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rob Taber
Best bit

I've only used the Badger on MDF so far and it's fantastic. I use it for general purpose profiling and pocketing - great job done fast. Best bit i own.

E
Ellis Vernon
The Badger - Big bite for a small bit

I was amazed with the performance of the badger. Just completed a table and chairs project for my great grandson and used the badger for some of the cutout work. It literally cut 3/4 inch birch plywood like butter. Very impressive.

D
Dean Rose
The Badger

Cut my Cut time in half, with less cleanup! Throughly impressed with this bit!

j
jim reed

I haven't had a chance to use it yet...

A
Aaron S.

Stays sharp and can run at a pretty fast feed rate.

CHECK OUT THE BADGER IN ACTION

Watch the badger make quick work of hardwood at unimaginable feed rates for an 1/8" bit.