GET THE IDC WOODCRAFT GIFT CARD

idc woodcraft 3/16" compression bit for cnc routers
idc woodcraft 3/16" compression bit for cnc routers used on ardionak chair
idc woodcraft 3/16" compression bit for cnc routers
idc woodcraft 3/16" compression bit for cnc routers
idc woodcraft 3/16" compression bit for cnc routers
idc woodcraft 3/16" compression bit for cnc routers
idc woodcraft 3/16" compression bit for cnc routers used on ardionak chair
idc woodcraft 3/16" compression bit for cnc routers
idc woodcraft 3/16" compression bit for cnc routers
idc woodcraft 3/16" compression bit for cnc routers

3/16" Compression Bit For CNC Routers, 1/4" Shank

The 3/16" compression endmill bit is a unique bit for CNC routers. It allows you to cut out your project while leaving both the top and bottom edges of your project clean (eliminates tear-out).

  • Cut diameter: 3/16", Shank: 1/4", Length: 2.375"
  • Flutes: 2, Flute length: 1"
  • Up-shear length: 0.15"
  • Material: 100% carbide

$35.87 USD

Availability: In Stock

Quantity:

Description

This premium 3/16" compression bit (also known as an up-down bit) is unique for a compression bit. It has the strength of a 1/4" yet can get almost the detail of a 1/8" compression bit.

Compression bits allow you to cut out your CNC project while leaving both the top and bottom edges of your project clean (eliminates tear-out).

The 3/16" compression bit can cut the entire depth of 3/4" material in one pass.

Compression bits are commonly used in place of the up-cutting endmills and the down-cutting endmills. They are excellent for use when cutting out plywood, and other lumber at full depth on your CNC woodworking projects.

CM-316

Specs

  • Type: Compression endmill
  • Overall Length: 2"
  • Shank: ¼"
  • Cut diameter” 3/16 (0.1875)
  • Total Flute length: 1.0
  • Up cut length: 0.15
  • Down cut length: .9
  • Flutes: 2
  • Mat'l: Solid carbide

Settings

  • Feed rate: 75 inches per minute
  • Plunge rate: 35 inches per minute
  • Speed: 19,000
  • Depth per pass: 0.375
  • Stepover: 40%

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

QR Code Image for 3/16" Compression Bit For CNC Routers, 1/4" Shank

Customer Reviews

Based on 43 reviews
100%
(43)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Ronald Haynes
Workhorse of a bit

I know Garrett has another bit he calls “the Beast“ but this bit is my personal beast! I’m currently on my third with two more as back up. I use this to carve figurines for an artisan, who then paints them. So far I have carved well in excess of 2000 figurines for her. This bit goes on and on and on, I’m simply amazed at how long it stays sharp and at the speed I can cut through 3/4 inch MDF. With its slightly smaller size, I generate less waste and less sawdust than I would with a 1/4 inch bit. That is a win!

D
DWIGHT FERGUSON
Awesome Bit

This is my "go-to" bit for 90% of my projects!

J
Jack menge
3/16 compression bit

i love the way it works.

J
Jeff Smith
3/16 Compression Bit

This bit has exceeded my expectations.

k
kelly fryou
great compression bit

the 3/16" bit works almost better than its brother, the 1/4" compression bit. very nice bit . thanks again.