30 Degree EXTREME DETAIL V-bit Bit for CNC Routers, 1/4 Shank

Ready for some EXTREME DETAIL carvings with your CNC router?

This is the best CNC router bit for wood when it comes to carving. The 30-degree next-generation "Blade" design actually carves the material, not scrape it like standard v-bits. And get the doily design you see in the image FREE by clicking here.

  • Shank: 1/4" / Length: 2.51" / Flutes: 1 / Flute length: 0.75"
  • 100% carbide
  • Made in the USA


Availability: In Stock



Ready to do some EXTREME DETAIL carvings with your CNC router? This 30 degree engraving bit is the one for your serious detail carves.

The needle-sharp "Blade" 30-degree carving v-bit does what other v-bits can't. It carves! Yes, this bit is a true engraving bit.

You also get the doily file you see in the image for FREE. This little project uses 1 bit...a 30° engraving bit. You can have it whether you get the bit or not. Click here and the file will download immediately.

The Blade is designed with a knife edge all the way to the point! Not only can you carve to 0.005" detail, this CNC router bit also cuts the wood, leaving a mind-blowing smooth cut. It is a true carving bit!

Most v-bits have a flat edge on them. They scrape the wood away which leaves a rough finish. And unless you want to sand your v-carves, you just might want to invest in this puppy first.

This and all bits on this site are made of 100% solid tungsten carbide. That's the material the professionals use because it lasts 50x longer than standard bits.

Even beginner CNC'ers never go back once they use the Blade carving bits!

Made in the USA



  • Shank: 1/4"
  • Length: 2.51"
  • Flutes: 1
  • Flute length: 0.75"
  • Material: 100% carbide


  • Feed: 25-40 inches per minute
  • Speed (rpm): 13000-16000
  • For CNCs with routers, use full speed

For Vectric users, get the latest CNC router bit tool database by clicking here

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

Customer Reviews

Based on 2 reviews
Jeff Smith
30 Degree V-bit

IDC Woodcraft Bits are the best. They are the only bits in my bit drawer

Geoffrey Daniel

30 Degree EXTREME DETAIL V-bit Bit for CNC Routers, 1/4 Shank