GET THE IDC WOODCRAFT GIFT CARD

0

0
1/8" and 1/4" radius roundover bit set for rounding cnc router projects
1/8" and 1/4" radius roundover bit set for rounding cnc router projects
1/8" radius roundover bit for rounding cnc router projects
1/4" radius roundover bit for rounding cnc router projects
1/8" radius roundover bit for rounding cnc router projects
1/4" radius roundover bit for rounding cnc router projects
1/8" radius roundover bit for rounding cnc router projects
1/8" and 1/4" radius roundover bit set for rounding cnc router projects
1/8" and 1/4" radius roundover bit set for rounding cnc router projects
1/8" radius roundover bit for rounding cnc router projects
1/4" radius roundover bit for rounding cnc router projects
1/8" radius roundover bit for rounding cnc router projects
1/4" radius roundover bit for rounding cnc router projects
1/8" radius roundover bit for rounding cnc router projects

Edge Rounding Bit Set 1/4 & 1/8 Radius Pointed Tip 1/4 Shank For CNC Routers

This set of 2 rounding bits contains a 1/8" round over bit and a 1/4" round over bit, both with 1/4" shanks for CNC routers.

The IDC Woodcraft brand rounding bit (a.k.a. round over bit, rounding bit, radius bit) is designed to simplify toolpath setup. It comes to a point, instead of having a flat at the bottom, so you don't have to mess with complicated offsets.

This completely eliminates the dealing with machining allowances to setup in your software. NO OFFSETTING OF THE BIT IS REQUIRED!! Just set it up to run on a profile line at 0.12" deep and you end up with a perfect radius that requires minimal smoothing.

Rounding bits create a radius edge on your CNC woodworking projects. The router bit with 1/4" shank adds elegance to your smaller CNC woodworking projects and gives them the extra character to make them pop. Round the borders of signs, or letters. It doesn't matter, as long as you have 1/8" to play with on your project, this cutter will add a gentle softness to your CNC projects.

$56.77 USD

$60.55 USD

Availability: In Stock

Quantity:

Description

This set of pointed tip 2 rounding bits contains a 1/8" round over bit and a 1/4" round over bit, both with 1/4" shanks for CNC routers.

The IDC Woodcraft brand rounding bit (a.k.a. round over bit, rounding bit, radius bit) is designed to simplify toolpath setup. It comes to a point, instead of having a flat at the bottom, so you don't have to mess with complicated offsets.

This completely eliminates the dealing with machining allowances to setup in your software. NO OFFSETTING OF THE BIT IS REQUIRED!! Just set it up to run on a profile line at 0.12" deep and you end up with a perfect radius that requires minimal smoothing.

Rounding bits create a radius edge on your CNC woodworking projects. The router bit with 1/4" shank adds elegance to your smaller CNC woodworking projects and gives them the extra character to make them pop. Round the borders of signs, or letters. It doesn't matter, as long as you have 1/8" to play with on your project, this cutter will add a gentle softness to your CNC projects.

RB-SET-48

Specs

For the 1/8" rounding CNC router bit.

  • Shank: 1/4" (6.35mm)
  • Flutes: 2
  • Length: 2" (55mm)
  • Radius: 1/8" from the center of the bit
  • Rounding flute length: 0.1"
  • Total Flute Length: 0.375
  • Material: Tungsten carbide brazed insert on 4140 body

Settings for your CNC router

  • Feed rate: 60 inches per minute
  • Plunge rate: 20 inches per minute
  • Speed (rpm) 17,000
  • Depth per pass 0.095"
  • Stepover: 20%

For the 1/4" rounding CNC router bit.

  • Shank: 1/4" (6.35mm)
  • Flutes: 2
  • Length: 2" (55mm)
  • Radius: 1/4" from center of bit
  • Material: Tungsten carbide brazed insert on 4140 body

Settings for your CNC router

  • Feed rate: 60 inches per minute
  • Plunge rate: 20 inches per minute
  • Stepover: 6-8%
  • Depth per pass: 0.250"
  • Speed (rpm) 17,000

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tim Wedding
Quick international service

Ordered the hog, beast and a few other bits. Got to Australia in a flash. The bonus M&M’s didn’t handle the trip as well.

N
Norman Streeter
Truly impressive bits.

These bits are very impressive, though I haven't had a chance to use them. I would recommend, however, that you enclose a copy of the machining parameters with them.

S
Stephen Worley

Edge Rounding Bit Set 1/4 & 1/8 Radius Pointed Tip 1/4 Shank For CNC Routers

j
jerry bradley
ROUTER BITS

So far i have had great results for all of the bits that I have purchased from IDC Woodcraft . The personel notes make it even better. Thank you all.

A
Alan Fetterhoff
Great

The only thing I would say besides awesome, I purchased the 1/8 downcut long mill and they are very easy to break, there is a lot of vibration going up the shaft and you have to go really slow. But that was my fault not yours

12