1/4 Down-Cutting Bit Endmill For CNC Routers, 1/4 Shank

Every bit I ordered has performed very well. I dulled the 1/4 “ bit by trying to drill a hole in walnut. It still cuts, but the bottom is not clean. The badger bit is bad to the core. ( By the way, I ordered one badger bit and received two.) The 1/4” rounder over bit has performed as I was hoping it would. The 60 def. bit worked great with letters. Haven’t used the 1/8” down cut yet.

Thanks for your service and useful information you post, it das really been helpful getting started. Keep it up!!! Marshall Ragsdale ( The Cross Keeper )

Works great clean cutting,I used it to make some signs Iwas very happy with results

Fantastic bit. Goes through oak easily.

The bit is performing beautifully. I am very happy with it.

The down cutting endmill bit did a nice clean cut especially on the top edges. I first tried an upcut bit but it splintered and chipped out along the top edge of hard maple which I was making a delicate carving. When I changed to your down cut endmill bit, the cut was nice, clean, and chips were uniformly sized. It worked great!