GET THE IDC WOODCRAFT GIFT CARD

3/4" Ball Nose CNC Router Bit, Cutting Board Juice Groove Bit 1/4" Shank

This Big Stiffy series 3/4" ball nose router bit (3/8" inch cutting radius) for CNC routers is your all-purpose accent bit. And it is excellent for broader juice grooves on larger cutting boards.

Sometimes called a bull nose bit, when it comes to profile work on keepsake boxes, this offers the best of both worlds...speed with a good stepover rate. And, of course, it is good for accent work when carving those bigger signs on your CNC router. Cuts fast and clean.

  • Shank: 1/4" / Length: 2" / Flutes: 2 / Flute length: 0.75" / Cut Dia. 0.75"
  • Cut radius 3/8" / Carbide tipped

$36.42

Availability: In Stock

Quantity:

Description

This Big Stiffy series 3/4" ball nose router bit (3/8" inch cutting radius) for CNC routers is your all-purpose accent bit. And it is excellent for broader juice grooves on larger cutting boards.

Sometimes called a bull nose bit, when it comes to profile work on keepsake boxes, this offers the best of both worlds...speed with a good stepover rate. And, of course, it is good for accent work when carving those bigger signs on your CNC router. Cuts fast and clean.

Your biggest advantage is the 1/2" flat sidewall gives you the ability to run deeper cuts without leaving 'witness' lines on the project.

With a 1/4" shank, it is suited well to remove large amounts of material in a single pass. The 'super-shear' blade design is designed to leave exceptionally clean cuts at higher feed rates.

Why is it called the Big Stiffy? 2 reasons. The first is, that this bull nose bit has extra mass, which absorbs vibration you'll find in other large CNC bits. The second reason is, that the overall bit length is shorter than the standard bit. This little design modification keeps your bit stiffer during cuts, which gives you a 50% improvement in your surface finish. In other words, the potential for chatter is virtually eliminated.

This bit has a carbide blade brazed to a 4140 body.

BN-34

Specs

  • Shank: 1/4" (6.35mm)
  • Radius: 0.375" (9.5mm)
  • Cut diameter: 0.75" (19mm)
  • Length: 2.0" (50mm)
  • Flutes: 2
  • Flute length: 0.75" (19mm)
  • Material: 100% tungsten-carbide tipped

Settings

  • Feed: 60 inches per minute (25mm/sec)
  • Speed (rpm): 14000
  • Max pass depth: 0.25" / 6mm
  • Stepover: 20%
  • For CNC routers, see the speeds & feeds table

For Vectric users, get the latest CNC router bit tool database by clicking here

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)