GET THE IDC WOODCRAFT GIFT CARD

60 degree wide body v bit with 1/4" shank for cnc routers
60 degree wide body v bit with 1/4" shank for cnc routers
60 degree wide body v bit with 1/4" shank for cnc routers
60 degree wide body v bit with 1/4" shank for cnc routers
60 degree wide body v bit with 1/4" shank for cnc routers
60 degree wide body v bit with 1/4" shank for cnc routers

60 Degree V Grooving Bit for CNC Routers, 1/4 Shank

The 60 degree v bit 'Super Shear' for CNC routers is the bit when speed matters as much as the carving quality. This 60 degree bit is part of the Big Stiffy series, a set of bits designed to virtually eliminate uneven carves due to chatter. See full description for more info.

  • Shank: 1/4" / Length: 2" / Flutes: 2 / Flute length: 0.65" / Cut Dia. 3/4"
  • Cut angle 60 degree / 100% carbide

$34.67 USD

Availability: In Stock

Quantity:

Description

The Big Stiffy series 60-degree v-bit for CNC routers is larger, and cuts deeper, than the typical 60 deg v bit. The extra body size lets you maximize your carve time while also leaving a clean cut.

With a 1/4" shank, it is the go-to 60 deg carving v-bit for home-based CNC'ers when it comes to larger projects when you are large v carves and chamfers on your CNC router woodworking projects. The 'super-shear' blade design is designed to leave exceptionally clean cuts at higher feed rates. This is the v bit to use when your v-carved letters are wider than 1/4" wide.

To see how effective your Big Stiffy 60-degree v-bit is, watch this YouTube video of a very large CNC router project completely carved in 11 minutes using the same size 120-degree V bit. The 60 deg grooving bit is designed to give you the exact same performance.

Why is it called the Big Stiffy? Overall, the bit body has more mass and has a slightly shorter shank. This little design modification on your 60 degree v-bit  keeps your bit stiffer during cuts, which gives you a 50% improvement in your surface finish. In other words, the potential for chatter is virtually eliminated.

This bit has a carbide blade brazed to a 4140 body.

BV-60

Specs

  • Shank: 1/4" (6.35mm)
  • Cut diameter: 0.75" (25mm)
  • Cut angle: 60 degrees
  • Length: 2.15" (52mm)
  • Flutes: 2
  • Flute length: 065"
  • Material: 100% tungsten-carbide tipped

Settings

  • Feed rate: 80 inches per minute
  • Plunge rate: 25 inches per minute
  • Speed(rpm): 14,000
  • Depth per pass: 0.250"
  • Stepover: 20%

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

QR Code Image for 60 Degree V Grooving Bit for CNC Routers, 1/4 Shank

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
W
Westley Branton
60V bit

I haven’t used this one yet but based off of the ones from this fine establishment that I’ve used, it’s going to be a great bit.

S
Sean A Babin
60 Degree V Grooving Bit for CNC Routers, 1/4 Shank

Great bit, would recommend this bit.

D
David Parkerson
It’s okay

I don’t feel like it cuts any better or worse than the $12 one I got from Sienci labs.

J
Joseph Werner
IDC bits

I use all types of bits from IDC woodcraft.
Your bits are the best. If I wouldn’t make stupid mistakes I wouldn’t have to order so many.
Thanks for the treats and funny messages with each order I receive. And they come quickly at that!!

R
Richard Patterson

60 Degree V Grooving Bit for CNC Routers, 1/4 Shank