1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets

Long 1/8" Router Bit Endmill For CNC Routers, 1/8" Shank

This long 1/8" CNC router bit gives you more creative ability to design and cut thicker projects you otherwise couldn't do. And you can design with more detail due to the smaller bit diameter. Think keepsake boxes and Aztec calendars with much more detail and depth! This extended 1/8" down-cutting bit can cut to depths of 1.0".

  1. 1.0" standard cut depth
  2. Capable of Up to 1.25" cut depth

$29.96 USD

Availability: In Stock

Quantity:

Key Details

Feeds And Speeds

Reviews

Designed for keeping detail on deep cuts, this long 1/8 router bit for CNC router projects can cut up to 1 inch deep. Also known as an extra-long down bit, or extended down cut endmill, it is for getting into those deep cuts where fine cutting and detail is needed.

The long 1/8 router bit is excellent for unusually deep CNC router woodworking projects, such as the pockets in guitar bodies during guitar making and keepsake boxes.

If you are getting into guitar making, you might be interested in the guitar maker's CNC router bit set.

Made from solid carbide, this extra long 1/8 router bit has a 1" flute length and is 2" in total length.

Item SKU: XD-18

Specs

  • Overall length: 2"
  • Flute length: 1"
  • Number of flutes: 2
  • Shank diameter: 0.125"
  • Cut diameter: 0.125"

Settings

  • Feed rate: 30 inches per minute
  • Plunge rate: 15 inches per minute
  • Speed(rpm): 14,000
  • Depth per pass: 0.050"
  • Stepover: 40%

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

QR Code Image for Long 1/8" Router Bit Endmill For CNC Routers, 1/8" Shank

Customer Reviews

Based on 17 reviews
82%
(14)
0%
(0)
6%
(1)
6%
(1)
6%
(1)
D
Donald Cruz
broken

messaged through chat on website, that their new Long 1/8" Router Bit Endmill For CNC Routers, 1/8" Shank broke on the final pass of a oak sign i was creating, when they went to the feed & speed, depth of cut. after i told them that I use your tool data base for feed and speed, felt like it was going know where, so I had to purchase more.

just counted the bit that I buy from you guys! 37 bits. wasn't happy.

R
Robert Strickland
short

When i order this bit i thought it was much longer than it is.

M
Mark E. Easterwood
Mistakes

I make mistakes all the time. I had a large project and was on my finish pass. I meant to put in a 1/8 Ballnose but put in this endmill in. It did a great job!

A
Andy Finck
Great little tool

Super sharp, super accurate, super clean cuts.
What more can you say!

J
Johnny King
Badger bit

Like the wood isn’t even there moves through awesomely