Add this item
+
Add this item
+
Add this item
If you’re tired of spending hours while you wait on your CNC router to remove material from your CNC woodworking projects, then you’ve come to the right bit.
Welcome to the aptly nicknamed "BEAST", a 1/4" hyper-speed CNC router bit from IDC Woodcraft, the ultimate solution for lightning-fast material removal.
With a ¼ shank, the “BEAST” falls into the roughing bit category. Even so, this bit will blow your mind with its unparalleled speed and material removal. Keep in mind that the "BEAST" is not designed to deliver clean cuts. Its sole purpose is speed, and it excels at it!
Featuring a staggering 3/4" depth of cut per pass, an 100ipm plunge rate, 80% step-over, (it is actually capable of feed rates as high as 800 inches per minute on floor-model machines) the "BEAST" is the undisputed champ when it comes to rapid material removal from your CNC router woodworking projects.
Designed with a thicker core and a shorter flute length, the "BEAST" CNC router bit is built to withstand rigorous workloads.
The ZrCN composite coating increases tool life significantly. Coating specs: Hardness of 2500 Vickers hardness, coating thickness of 1 to 4 microns, friction coefficient of 0.3, maximum service temperature of 1000° F (550° C)
But it's not just about saving time; it's about extending the life of your other CNC router bits as well. By employing the "BEAST" as your workhorse for major material removal, you'll extend the lifespan of your regular CNC router bits. Let them handle the finishing touches while the "BEAST" handles the heavy lifting.
Let the “BEAST” out of its cage on your CNC woodworking projects and watch how much time you’ll save!
Item SKU: BEAST
This thing saves so much time! Cuts carve time dramatically. Don’t know how I lived without it.
Best bits for area clear i ever used. Not as loud when cutting either. Grade A+ bits. I'm thinking the 3 I bought will last a long time.
Just purchased my second beast as the first one broke. All my fault.
Really impressed with the rate at which this bit can plow thru material.
I bought this to carve out some deeper pockets. I used it for the first time today and it performed very well. I set it up at a feed rate of 80 ipm and a plunge rate of 80 ipm with a pass depth of 1/4" and a stepover of 80%. It made quick work of a 1" deep pocket.
I will be using this to "hog out" deeper pockets and then follow up with a finishing pass with a standard endmill with a shallow pass and a smaller stepover.
