1/4" extended downcut carbide endmill by idc woodcraft for deep pockets
1/4" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/4" extended downcut carbide endmill by idc woodcraft for deep pockets
1/2" ball nose with 1/4" radius and 1/4" shank for carving cutting board juice grooves
1/4" extended downcut carbide endmill by idc woodcraft for deep pockets
1/4" extended downcut carbide endmill by idc woodcraft for deep pockets
1/8" extended downcut carbide endmill by idc woodcraft for deep pockets
1/4" extended downcut carbide endmill by idc woodcraft for deep pockets
1/2" ball nose with 1/4" radius and 1/4" shank for carving cutting board juice grooves

Long 1/4" Router Bit For CNC & Trim Routers, 1/4" Shank

This long 1/4" CNC router bit gives you a full 1-3/4" cut! Great for guitar bodies, keepsake boxes, and unusually thick CNC router wood projects, such as deep 3D carvings or recessed work. This extended 1/4" down-cutting bit can cut to depths of 1.75".

  1. 1.5" standard cut depth
  2. Capable of Up to 1.75" cut depth

$45.96 USD

Availability:
Out Of Stock

Description

This 1/4 extra long straight router bit for CNC routers (1/4 shank) is the main cutting and finishing down cut extended length endmill for cutting guitar bodies, keepsake boxes, and other unusually thick woodworking projects, such as deep 3D carvings or recessed work. This extended 1/4" down-cutting bit will clean up your wood projects to a full 1.75"!

This type of long 1/4 bit is hard to find for such project work but is commonly needed. The down shear flutes keep the important top edge of your wood project clean to eliminate tear-out or chipping.

  1. 1.5" standard cut depth
  2. Capable of Up to 1.75" cut depth

This long 1/4 bit is not only for CNC routers. It can also be used in handheld trim routers to do manual woodworking projects.

For these reasons, you want to make sure your long 1/4" router bit is made right & built to last.

Built above industry standards and 100% tungsten carbide. Carbide is what professional metal machinists use to make complex items like car engines. It stays sharp 50x longer than conventional CNC router bits.

The "HOG" roughing bit is a recommended complementary bit to rough out all the wood of the 'bowl' part of the CNC router woodworking project. The HOG will do the heavy carving, leaving this specialty extended length bit to do the finish work.

To see why the HOG is a bit you want to get with your extended downcut bit, watch this video to see it in action.

XD-14

Specs

  • Overall length: 3"
  • Flute length: 2"
  • Number of flutes: 2
  • Shank diameter: 0.250"
  • Cut diameter: 0.250"

Settings

  • Feed rate: 40 inches per minute
  • Plunge rate 15 inches per minute
  • Speed(rpm): 14,000
  • Depth per pass: 0.250"
  • Stepover: 40%

For Vectric users, get the latest CNC router bit tool database by going to this page

For CNC’s with routers, refer to this PDF download feeds & speeds table

Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App

QR Code Image for Long 1/4" Router Bit For CNC & Trim Routers, 1/4" Shank

Customer Reviews

Based on 23 reviews
91%
(21)
4%
(1)
4%
(1)
0%
(0)
0%
(0)
J
James Konrad
1/4 Long Reach EM

I used the IDC 1/4 Long Reach EM to cut through 1.25” walnut. With the appropriate feed & speed, the bit had no issue making this deep, slotted cut!

L
Larry Crouch
Great and still in the box

Have not used the bit yet.

R
Russell Baskin

Have not used it yet.

D
Dylan Mcgregor

Bits are incredible will be ordering more,
Also customer care is great any questions you have you can check out the QR code to direct you. Garret is great always there to lend a helping hand!!

R
Roger K Smith
Long EM .25 Bit

Works great! Great bit to have with my router bit collection.