Add this item
+
Add this item
+
Add this item
The Shark Boss™ T-Nut (M6-1, Zinc-Plated Steel) is precision-engineered specifically for NextWave Shark CNC track beds, delivering secure, repeatable clamping performance in demanding CNC routing environments.
Purpose-built to integrate seamlessly with the EdgeHugger™ Clamp System, this T-nut provides a direct-fit solution for Shark CNC owners who need reliable workholding hardware designed for real cutting forces - not generic shop hardware.
If you run a NextWave Shark CNC and want full compatibility with the EdgeHugger™ system, the Shark Boss™ T-nut is the correct hardware choice.
Unlike universal T-nuts, the Shark Boss™ is dimensioned specifically for the NextWave Shark track bed geometry to ensure:
Proper seating in the track
Stable engagement under vibration
Consistent clamp alignment
Repeatable torque performance
This eliminates the guesswork and poor fitment issues often associated with off-the-shelf T-nuts.
Thread: M6 × 1.0
Material: Zinc-plated steel
Overall width: 0.50″ (12.7 mm)
Base width: 0.75″ (19.1 mm)
Thread boss diameter: 0.30″ (7.5 mm)
Thread boss height: 0.31″ (7.8 mm)
Base thickness: 0.05″ (1.3 mm)
Manufacturer: ToolQuest
Designed for: NextWave Shark CNC machines
The zinc-plated steel construction provides strength, corrosion resistance, and long-term durability in production and high-use shop environments.
For Shark CNC users, zinc-plated steel offers:
Higher tensile strength than brass
Excellent durability under repeated tightening
Corrosion resistance for long-term shop use
Reliable thread engagement with M6×1 hardware
This makes the Shark Boss™ T-nut ideal for demanding CNC routing operations and repeat fixture changes.
✔ Designed specifically for Next Wave Shark CNC track beds
✔ Works with M6×1 stainless flat-head screws
✔ Compatible with EdgeHugger™ clamps
If you do not own a NextWave Shark CNC machine, refer to the Track Boss™ universal T-nut option instead.
NextWave Shark CNC owners
Full-sheet CNC routing setups
Shops expanding EdgeHugger™ systems
Users demanding precise T-track fitment
High-repeat production environments
The Shark Boss™ T-nut is the dedicated Next Wave Shark-compatible hardware option for:
Expanding your EdgeHugger™ clamp coverage
Replacing worn or damaged hardware
Building custom CNC fixturing setups
It maintains the low-profile integrity and alignment performance that EdgeHugger™ systems are engineered around.
The EdgeHugger™ Clamp System is a precision CNC workholding clamping solution engineered to secure material from the edge while staying almost completely out of the cutting envelope.
Unlike most top-down clamps that increase collision risk, EdgeHugger™ clamps sit just 0.22″ above the workpiece and intrude only 0.23″ from the edge. virtually eliminating clamp collision potential. This allows safer near-edge machining.
However, the main benefit is the holding power these clamps deliver. Most clamps can apply up to #150 pounds max force. The EdgeHugger™ applies 1000 psi per clamp!
Click here to learn more about EdgeHugger™.
The Shark Boss™ T-Nut is EdgeHugger™ solution designed specifically for Shark Next Wave CNC Routers.
Will this fit my NextWave Shark CNC?
Yes. This T-nut is dimensioned specifically for Shark CNC track beds.
What thread size does it use?
M6 × 1.0 metric thread.
Can I use this with other CNC machines?
This model is designed specifically for Shark track geometry. For universal aluminum T-track systems, use the Track Boss™ brass T-nut instead.
Is this made in the USA?
Yes. Manufactured in the United States by ToolQuest.
When it comes to CNC workholding, hardware fit matters. The Shark Boss™ T-Nut is not a modified generic fastener—it’s engineered specifically for NextWave Shark CNC systems to ensure clean fitment, reliable clamping, and long-term durability.
If you’re running an EdgeHugger™ setup on a Shark CNC, this is the T-nut designed to do the job right.
TQ-N-SB
Item SKU: TQ-N-SB
Loading Specs and Settings
For Vectric, Fusion 360, Carbide Create and Carveo users, get the latest CNC router bit tool database by going to this page
For CNC’s with routers, refer to this PDF download feeds & speeds table
Get feeds and speeds in your shop by scanning this QR code with the IDC Woodcraft App!
